Viking VSOC530 Installation Instructions - Page 8

Installation Instructions for Standard Surface Mount WARNING Always take caution lifting heavy products. 2. Use a minimum of 2 people to lift and install oven. Place the oven adjacent to the cabinet opening, see Figure 4. Plug the power supply cord into the electrical outlet. 3. Carefully guide the oven between the mounting brackets. Avoid pinching the cord between the oven and the brackets. 4. Slide the oven all the way back until the oven frame is seated against the cabinet and the mounting brackets. DO NOT lift this unit using the outer oven frame Lift point on frame Side Handle (x2) Figure 4 5. Open the oven door and insert the 4 mounting bolts supplied. Do not completely tighten. See Figure 5. Note: Slide on shoulder bolt sleeves before mounting Figure 6 7. Check alignment of oven then tighten the 4 mounting bolts in Figure 5 and the 2 shoulder bolts in Figure 6 to secure oven. 8. Install Handle. Loosen the two set screws on the handle, apply lock tite to the set screws. Slide the handle over the studs on the oven door and tighten the set screws using the provided allen wrench. Note: the set screws on the handle should be facing down during installation. See Figure 7. Figure 5 6. Open the drip tray door and insert the 2 shoulder bolts supplied. See Figure 6. Do not completely tighten. E8 Figure 7