Viking VSOT Installation Instructions - Page 12

Installation

Get Viking VSOT PDF manuals and user guides View all Viking VSOT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Installation • BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. • It is recommended to use standard 2 x 4 support posts with a minimum of 3/4" (1.9 cm) solid base to support the oven. Support posts should be level with the floor line and well-secured to the base of the cabinet. Base cabinet support must be able to support the oven's weight - 410 lbs. (186 kg). • Use of a hydraulic lift is recommended for the installation of double oven units. • All openings in the wall behind the appliance or in the floor under the appliance should be sealed. • Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors. • WARNING: DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. SUCH USE MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER PERSONAL INJURY. Attach the skid plate before installing the two slide rails. If possible, the rails should be placed on top of any studs that might be located under the cabinet interior floor. 1. Remove adhesive backing from skid plate. Center across the inside front of the cabinet opening with flange and screw locations on front outer edge. Screw into place with enclosed screws. 2. Remove adhesive backing from one of the slide rails. 3. Place the slide rail left of the center line on the cabinet floor (adhesive side down) flush with the outer edges of the skid plate. Press the slide rail down firmly against the cabinet floor. 4. Repeat step 3 for the second slide rail. Cabinet Floor Center Line Cabinet Skid Plate and Side Rails Two 21" (53.3 cm) slide rails and one 28" (71.1 cm) skid plate have been included to help install the oven into your cabinet more easily by providing a flat smooth surface on which to slide the oven into place. The skid plate and slide rails are flat metal strips with adhesive tape strips on one side. adhesive strips Skid plate 1 Remove the outer corrugated cover and all inner packing. Remove wooden brace on front of pallet. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
12
Installation
•
BE SURE
that support for this appliance is
perpendicular to the front facing of the wall or
cabinet before you perform the installation.
•
It is recommended to use standard 2 x 4 support
posts with a minimum of 3/4" (1.9 cm) solid base
to support the oven.
Support posts should be
level with the floor line and well-secured to the
base of the cabinet.
Base cabinet support must
be able to support the oven's weight - 410 lbs.
(186 kg).
•
Use of a hydraulic lift is recommended for the
installation of double oven units.
•
All openings in the wall behind the appliance
or in the floor under the appliance should be
sealed.
•
Keep appliance area clear and free from
combustible materials, gasoline and other
flammable vapors.
•
WARNING: DO NOT
USE AN EXTENSION CORD
WITH THIS APPLIANCE. SUCH USE MAY RESULT IN
FIRE, ELECTRICAL SHOCK OR OTHER PERSONAL
INJURY.
Remove wooden brace on front of pallet.
Remove the outer
corrugated cover and all
inner packing.
1
Cabinet Skid Plate and Side Rails
Attach the skid plate before installing the two
slide rails.
If possible, the rails should be placed
on top of any studs that might be located under
the cabinet interior floor.
1.
Remove adhesive backing from skid plate.
Center across the inside front of the cabinet
opening with flange and screw locations
on front outer edge.
Screw into place with
enclosed screws.
2.
Remove adhesive backing from one of the
slide rails.
3.
Place the slide rail left of the center line on the
cabinet floor (adhesive side down) flush with
the outer edges of the skid plate.
Press the
slide rail down firmly against the cabinet floor.
4.
Repeat step 3 for the second slide rail.
Two 21" (53.3 cm) slide rails and one 28" (71.1
cm) skid plate have been included to help
install the oven into your cabinet more easily by
providing a flat smooth surface on which to slide
the oven into place.
The skid plate and slide rails
are flat metal strips with adhesive tape strips on
one side.
adhesive
strips
Cabinet Floor Center Line
Skid plate