Viper 160XVL Owner Manual - Page 28

✂ Quick Reference Guide Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet. ✂ To arm using your remote ■ To arm the system press for one second. The doors will lock (if connected). The LED will begin to flash. The vehicle's horn (if connected) will honk and the parking lights will flash once to confirm arming. To disarm using your remote ■ To disarm the system press for one second. The doors will unlock (if connected). The vehicle's horn (if connected) will honk twice and the parking lights will flash twice. Disabling the Failsafe® Starter Kill without a transmitter ■ Turn on the ignition. Press and release the Valet button within 10 seconds. The LED will stop flashing and the vehicle should start. To remote start the vehicle ■ Press twice within 3 seconds. The parking lights will turn on (if connected) and the vehicle will start and run for the programmed duration. To enter or exit Valet Mode ■ Turn the ignition to the "ON" position. Turn the ignition back off. Press and release the Valet button within 10 seconds. The status LED will light steadily if you have entered Valet Mode. To exit Valet Mode, repeat the steps above. The LED will turn off when exiting Valet Mode. To activate Panic Mode ■ Press and hold for 1.5 seconds. To activate Timer Mode ■ Press and to start the vehicle, and run it for the set duration. To activate Turbo Mode ■ Park the vehicle and set parking brake. Remove your foot from the brake pedal and leave the engine running. Press and release the and buttons. To disable the remote start system ■ To disable the remote start, move the shutdown toggle switch to the OFF position. Location of Shutdown Switch © 2006 Directed Electronics-all rights reserved 25