Viper 200MAX Owner Manual - Page 6
Disarming without a transmitter, Valet Mode, Auxiliary function
View all Viper 200MAX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Disarming without a transmitter This feature allows you to disarm the security system without the remote transmitter should it be lost, damaged or disabled. In order to disarm the system without the transmitter, you must have the vehicle's ignition key and know where the Valet button is located. To disarm the security system, turn the ignition to the "ON" position. Press the Valet button the preset number of times (one to five times) within 15 seconds. After 5 seconds, the system will now disarm. If the system does not disarm, you may have waited too long; turn the ignition "OFF" and "ON" and try again Location of the Valet button Number of pulses Valet Mode You can prevent your security system from automatically arming and triggered by using the Valet Mode. This is very useful when washing the recreationnal vehicle or having it serviced. In Valet mode, the security system will not arm, even with the remote transmitter. To enter or exit Valet mode : 1. Turn the ignition "ON" 2. Turn the ignition "OFF" 3. Press and release the Valet button within 10 seconds. You are now in Valet mode , to exit Valet mode repeat step 1 thru 3 again. Auxiliary function Press on buttons and together for 2.5 seconds, this will activate optionnal 508 D Microwave perimeter sensor. 4 2002 Directed Electronics, (Canada). Inc.