Viper 3102V Quick Reference - Page 13

System maintenance This system needs no specific maintenance beyond remote control battery replacement. The remote is powered by two 3V, CR2016 batteries. 1. Using a small flat-head screwdriver, insert into slot located on the side of the remote control and carefully pry open the unit. 2. Turn unit over and carefully remove rear housing. Remove the battery from holder and replace with a new one. 3. Reassemble all parts and snap together. Note Verify that the battery polarity is correct when replacing. Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484 Other patents pending. © 2013 Directed. All rights reserved. 11