Viper 460XV Owner Manual - Page 12

one-time bypass - alarm system

Page 12 highlights

When armed, your vehicle is protected as follows: ➤ Movement inside the passenger compartment will trigger the system. The triggered sequence is 30 seconds of constant siren and indicator light flashing. ➤ If a door is opened, the system will immediately trigger. ➤ Turning on the ignition key will trip the same two-stage response as opening a door. ➤ The built-in triple circuit Immobiliser prevents the vehicle's ignition, starter and fuel pump from operating. ➜ one-time bypass This feature stops the alarm from arming or activating any outputs that are programmed to activate when the alarm is armed. One-time bypass will defeat the following actions: Passive arming: If programmed ON the alarm will not arm itself. If the remote is used to arm the alarm after exiting the vehicle: Window roll up: If programmed ON this output will not activate. Linked Auxiliary Outputs: If programmed to activate on arm, they will not activate. © 2005 directed electronics, inc. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

13
© 2005 directed electronics, inc.
When armed, your vehicle is protected as follows:
Movement inside the passenger compartment will trigger
the system. The triggered sequence is 30 seconds of constant
siren and indicator light flashing.
If a door is opened, the system will immediately trigger.
Turning on the ignition key will trip the same two-stage
response as opening a door.
The built-in triple circuit Immobiliser prevents the vehicle's
ignition, starter and fuel pump from operating.
one-time bypass
This feature stops the alarm from arming or activating any
outputs that are programmed to activate when the alarm is
armed.
One-time bypass will defeat the following actions:
Passive arming: If programmed ON the alarm will not arm
itself.
If the remote is used to arm the alarm after exiting the vehicle:
Window roll up: If programmed ON this output will not
activate.
Linked Auxiliary Outputs: If programmed to activate on
arm, they will not activate.