Viper 460XV Owner Manual - Page 28

➜ arming the vrs® To arm the VRS®, turn the ignition to the ON position and press the arm button on the remote transmitter for one second. The indicator lights will flash and the siren will chirp once. This can be done before driving or while driving the vehicle. Once the system is armed, it will initiate its triggered sequence (see below) if any door is opened and closed. The system will now trigger automatically the next time you or anyone drives the vehicle. This helps to protect the vehicle if someone takes your keys and remote control. note: If the VRS® system is armed while operating the vehicle and not disarmed prior to leaving the vehicle, it is still armed and will trigger the next time the vehicle is driven. ➜ vrs® triggered sequence Fifteen seconds after the last door has closed, the system's status LED will begin flashing. This delay is intended to allow you time to distance yourself from your vehicle in the event of a carjacking. Forty-five seconds later, the siren begins chirping and the indicator lights begin flashing. Fifteen seconds after the siren chirps begin, the siren's output will change to a continuous blast. From this point on, when the ignition key is turned off, the VRS® will immediately turn on the triple circuit immobiliser to prevent the vehicle from being restarted. © 2005 directed electronics, inc. 29