Viper 5101 Owner Manual - Page 29
Smart start activation - not working
View all Viper 5101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
After exiting the vehicle, lock the system. The vehicle remains running for the programmed runtime. (The remote start feature is still enabled). You can still remote start the vehicle after the turbo timer has timed out and shut Off the vehicle. For safety reasons, if a door is opened (while the system is Locked or Unlocked) while you are away, the remote start exits the manual transmission mode and will not remote start until the MTS sequence is reinitiated. ➢ Smart start activation Smart Start uses the hours and cycles settings used in Timer Mode, in addition to temperature or voltage, to automatically start the engine. Activation begins the countdown timer. When the timer expires the vehicle interior temperature is checked and, if it exceeds the temperature or voltage thresholds the engine starts. When the Remote start runtime expires the engine shuts off and the countdown timer restarts. Smart Start is exited after the final start. Note: This feature works only when the system has been locked with the remote. The factory setting for temperature high is 100º, and the low is 0º (F). The voltage setting is 10.5v. These settings can be adjusted, or turned off by your authorized Directed dealer using the Bitwriter. To activate Smart Start mode: • Press the button on the remote 3 times and then press the bAuUXtton. The parking lights flash 5 times fast to confirm the remote is in Smart Start mode. To activate Smart Start mode with a manual transmission: 1. Enter the MTS procedure. 2. Exit the vehicle and press the button on the remote (the vehicle shuts down when locking). 3. Press the button on the remote 3 times and then press the bAUuX tton. The parking lights flash 5 times fast to confirm the remote is in Smart Start mode. © 2009 Directed Electronics. All rights reserved. 21