Viper 9252 Owner Manual - Page 10

Remote Start Read this user guide, including the warnings section before using the remote start. Ensure that the vehicle is parked in an open area, not in a garage. To use your remote start to pre-warm or pre-cool your vehicle, remember to set the climate controls to the desired settings before shutting off the engine. Remote starting your vehicle Press the button on the remote control. The vehicle parking lights flash. The Remote Start LED flashes and ascending Remote Start tone plays. The preset remote start run time is 15 minutes. This can be changed to between 1 and 60 minutes (see your authorized Directed dealer for programming changes). Points to remember If the hood is open or if the brake pedal is pressed, the vehicle will not remote start. The remote start shuts down: s When the brake pedal is pressed s The hood is opened s When the remote start command is sent again from a remote control s When runtime expires Manual transmission vehicles When installed into a manual transmission vehicle, the system requires © 2009 Directed Electronics. All rights reserved. 7