Viper VSS4000 Addendum - Page 1

Addendum: Installation Guide ! ATTENTION INSTALLER ! The VSS4000 integrates the Viper 5101 Remote Start with the VSM100 Viper SmartStart Module. Read this addendum and both installation guides thoroughly before beginning. They will help you understand how to combine the two systems, avoid mistakes, and smoothly complete the installation, verification and customer registration processes. The corrections made in this addendum address the 5101 installation guide (N4102V 2008-06) as it pertains to the VSN4000 kit. Installation guide Page # Description/error Inside front Error is found in the Bitwriter® chip vercover & 31 sion requirement: version 2.5 7 What is included: Correction The Bitwriter (p/n 998U) requires chip version 2.6 or newer to program this unit. The VSS4000 system includes: This list has changed to integrate two systems, see Correction column. One - 5101V remote start/keyless entry main module, Owner's & Installation guide, QR Wiring guide, (and supporting documentation). One - five-button /1-way Supercode remote control (p/n 7153V) One - Control Center with integrated Valet Override switch One - Shutdown toggle switch One - VSM100 Viper SmartStart module, wire harness, Quick reference User's & Installation guide. Module ID stickers. 36 Step 1 reads: Should read: A U X Hold....until you hear it emit a long beep. The transmit LED comes on solid. 1. Hold the button on the remote until the transmit LED lights solid (approx. 10 seconds). 2. Press and hold the bAuUXtton until the LED blinks three times and then lights solid. 56 Remote starting diagnostics correction to Should be: introduction paragraph A few select system conditions may prevent the en- gine from starting. The condition that causes this non-start will be reported by flashing the vehicle parking lights. The number of flashes and the list below identify the condition. ADVSS4000 2009-09