Vivitar CV-1025V CV-1025 Manual - Page 7
Preparing Your Camera For Use - download
View all Vivitar CV-1025V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Preparing Your Camera For Use Battery Installation Your camera requires two AAA alkaline batteries, which must be inserted as follows: 1. Slide open the battery compartment at the bottom of the camera. 2. Insert the batteries in accordance with the polarity (+/-) shown on the inside of the cover. 3. Close the battery compartment. The LCD display screen will ash if your batteries are running low in which case you will need to replace the camera's batteries before taking photos. When the batteries get very low on power, the LCD display screen will display "Lo" and then automatically switch o . Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid leakage and corrosion. Warning: • Please download any photos you have on the camera before opening the battery compartment. • Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera. • Download your photos as often as possible. Photos may be lost when the batteries run low. -6-