Vizio P42HD User Guide - Page 3

Chapter 1 - Introduction 1.1 - Before Use Congratulations on your VIZIO P42 42" Plasma Television purchase. Thank you for your support of V, Inc. and its Plasma Television product line. The P42 is a precise electronic product and you should read the following instructions carefully to maximize the performance of the product. It has passed the Class-B EMC test and the UL and CSA safety certifications and you can be assured of the highest quality display with the utmost reliability. After you have finished reading the instructions, put them away in a safe place for future reference. Note: In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same. 1.2 - Specifications Panel Resolution Pixel (Dot) Pitch Display Compatibility Signal Compatibility Brightness Contrast Viewing Angle Inputs Output Features Interface Speakers Power Input Voltage Range Power Consumption Dimensions Net Weight Gross Weight Certifications P42 ED P42 HD 42", 16:9 Aspect Ratio 852 x 480 1024 x 768 1.08 mm x 1.08 mm (H x V) 0.90 mm x 0.676 mm (H x V) EDTV (480p) HDTV (720p) 480i (SDTV), 480p (EDTV), 720p (HDTV), 1080i (HDTV) 1000 cd/m2 1000 cd/m2 2000:1 typical 3000:1 typical >160 degrees (horizontal and vertical) 2 x Composite Video (2 x RCA), 2 x S-Video (1 x 4-pin DIN), 1 x Component (3 x RCA, YCbCr Video) & 1 x Component (3 x RCA, YPbPr Video), 1 x Digital Video (1 x DVI), 1 x Analog RGB (1 x 15-pin D-Sub), 4 x Audio (2 x RCA, Left + Right), 1 x RF (1 x F Connector for internal NTSC Tuner), 1 x Audio (1 x Stereo Mini Jack) 1 x Stereo Audio (1 x RCA, L & R), 1 x subwoofer (1 x RCA) PiP, POP, CC, V-Chip, 3D Comb Filter, 3:2 Pull Down, Gamma Correction, Scalar and De-interlacer, NTSC Video decoding via RF (Antenna, Cable or Satellite [Set top box may be required]) or Video (CVBS, S-Video or Component YCbCr), Progressive Scan Video via Component YPbPr, VGA or DVI, HDTV via Component YPbPr, VGA or DVI (Set top box may be required), Computer 640x480, 800x600, 1024x768 via VGA or DVI, SRS and BBE Sound enhancement. 1 x RS232 (9-pin D-sub) 2 x 15W IEC Connector for direct power line connection 100 - 240 Vac at 50/60 Hz. 360 W average 440 W average 40.9" x 25.45" x 5.2" w/o stand or speakers; 48.65" x 27.2" x 10.6" w/stand and speakers 85 lbs w/stand and speakers 115.8 lbs w/stand and speakers UL, C-UL, FCC Class B Version - 7/21/2004 2