Vizio RS120-B3 User Manual - Page 17

4 ADJUSTING THE AUDIO SETTINGS To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/ Right Arrow buttons to change the setting:. • Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track. • Digital Audio Out - Changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio system. Select PCM or Bitstream. VIZIO AUDIO Lip Sync - Digital Audio Out Analog Audio Out +0 Bitstream Fixed You must select Bitstream for audio with more than two channels (3.0, 5.0, or 5.1, for example). • Analog Audio Out - Sets the volume control properties for the RCA connector when connected to a home theater audio system. Select Variable if you are controlling the volume with the TV's volume controls, or select Fixed if an external audio device (sound bar or AV receiver) will control the volume. SETTING TIMERS Setting the Sleep Timer When activated, the TV's sleep timer will turn the TV off after a set period of time. 1. Press the MENU button on the remote. The on-screen menu is WdidiesplaZyooemd. Normal Panoramic 2. Use the Arrow buttons on the remote to highlight Timers and press OK. The TIMERS menu is Edxitisplay2eDd. 3D VIZIO TIMERS Sleep Timer Auto Power Off Screen Saver Blank Screen Off 10 minutes Off 3. Use the Left/Right Arrow buttons on theABrCemote to highlight the period of time after Inwphutich yWoidue wanCtCthe TV to go to sleep: 30, 60, 90, 120, or 180 minutes. If you don't want the sleep timer to activate, change Sleep Ttimheer setPticintugre to AOudffio. 4. When you have finished setting the sleep timer, press the EXIT NebtwuotrtkonSeottinngtshe Hreelpmote. Setting the Auto Power Off Feature To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. To set the Auto Power Off feature: 1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Auto Power Off. 2. WUidsee thZoeom Left/NRorimgahl t PAarnroroawmicbuttons on the remote to change whether the TV will turn off. If you don't want the TV to turn off when there is no signal, change the setting to Off. Otherwise, select 10 minutes. Exit 2D 3D 3. When you have finished setting the auto power off time, press the EXIT button on the remote. ABC Enabling the Screen Saver Input Wide CC If there is no on-screen content or static content when audio is streaming, the backlight is turned off, saving energy. You can set the time before the screen saver begins. To SsTliem eeteprthePSiccturreeenASuadvioer: 1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Screen Saver. 2. NeUtwsoerkthSeetLtinegfst/RHieglhp t Arrow buttons on the remote to change the time before the screen saver begins. If you don't want the screen saver to be active, change the setting to Off. Otherwise, select 2, 10, or 20 minutes. 3. When you have finished setting the screen saver time, press the EXIT button on the remote. To exit the Screen Saver Press any button other than the Volume and Mute buttons on the remote to exit the screen saver. 4. When you have finished adjusting the audio settings, press the EXIT button on the remote. 17