Vizio RS120-B3 User Manual - Page 18
Using The Network Connection Menu
View all Vizio RS120-B3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4 Blank Screen Feature You can blank the screen while there is audio streaming. This feature helps save energy and the life of the screen. To blank the screen: 1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight Blank Screen and press OK. USING THE NETWORK CONNECTION MENU Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. Connecting to a Wireless Network To connect to a wireless network whose network name (SSID) is being broadcast: To exit the Blank Screen Press any button other than the Volume and Mute buttons on the remote to exit the blank screen. If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu. You must disconnect the Ethernet cable to set up a wireless network connection. 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Network and press OK. The NETWORK menu is displayed. 3. If you do not see your wireless network displayed, highlight More Access Points and press OK. The WIRELESS ACCESS POINTS menu, which is a list of available wireless networks, is displayed. 4. Highlight the name of your wireless network (this is the network's SSID) and press OK. 5. Using the keyboard on the remote, enter your network's password, then highlight Connect and press OK. VIZIO NETWORK Wired Connection Disconnected Wireless Access Points More Access Points WPS Manual Setup Hidden Network Test Connection 6. Press the EXIT button on the remote. Changing the Manual Setup Settings Advanced users can fine-tune the network settings using the Manual Setup feature. To change advanced network settings: 1. From the NETWORK menu, highlight Manual Setup and VIZIO press OK. The MANUAL SETUP MANUAL SETUP menu is displayed. DHCP Off 2. To change the settings manually, use the Arrow buttons on the remote to highlight DHCP and then use the Left/Right Arrow buttons to change the setting to Off. 3. Use the Arrow and OK buttons to adjust each setting: Wide Zoom Normal Panoramic • IP Address - The IP address assigned to the TV. IP Address Subnet Mask Default Gateway Pref. DNS Server Alt. DNS Server Wireless MAC 0:0:0:0:0:0 Save Cancel • Subnet Mask - The subnet Exit mas2kD. 3D • Default Gateway - Your network's dAeBfCault gateway address. •InputPrefW.idDeNS SCeCrver - Your preferred domain name server address. ST•lim eeepr AadltdP. ricDetuNsrseS. Server Audio - Your alternate domain name server 4. Use the Arrow buttons on the remote to highlight Save and press OK. Network Settings Help 5. Press the EXIT button on the remote. Wide Zoom Exit 2D Input Wid Sleep Timer Pictu Network Settin 18