Vizio S5430w-C2 Quickstart Guide - Page 15

Function DTS TruSurround On/Off Surnd DTS TruVolume On/Off TruVol Night Mode On/Off Night AV Delay AV Delay LED Behavior Surround On: Surround Off: TruVolume On: TruVolume Off: Night Mode On: Night Mode Off: Two center LEDs indicate minimal delay. Description Press the Next/Previous button to enable/disable DTS TruSurround. When enabled (On), all inputs will produce virtual surround sound. When disabled (Off), all sources will playback on 3 channels (Left, Center, and Right). Press the Next/Previous button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. Press the Next/Previous button to enable/disable Night Mode. When enabled (On), the Sound Bar will lower bass frequency levels to provide a more quiet environment (ideal for apartment living and homes with sleeping children). Press the Next/Previous button to increase/decrease the amount of audio delay. The LED indicators will move to the right with increasing audio delay levels. TV Remote VZtvRmt On Eco Power On/Off EcoPwr On Program Remote Prg Remote Reset Reset No When a Dolby Digital or DTS signal is detected TV Remote On: TV Remote Off: Eco Power On: Eco Power Off: --- --- Dolby Digital Logo DTS Logo Press the Next/Previous button to enable/disable VIZIO TV Remotes.When enabled (On), you can use a VIZIO TV remote control to turn on the Sound Bar (using the TV Volume Up button) and control volume. Press the Next/Previous button to enable/disable Eco Power Mode. When enabled (On), the Sound Bar will go into standby after a period of inactivity. The sound bar will automatically turn off when no audio signal is detected. Off disables this feature. Note: Enable this function if using a TV remote to control the sound bar. Press the Next/Previous and Play buttons to toggle and select and program your TV remote to control the Volume Down, Volume Up, and Mute functions on your Sound Bar. See Programming the Sound Bar on page 16. Press the Next/Previous and Play buttons to select and reset your remote and Sound Bar to the factory default settings. All paired Bluetooth devices will be unpaired. All programmed IR remotes will also be removed. See Resetting to Factory Default Settings on page 17. Dolby Digital and DTS are only available on either the HDMI, Digital Coaxial Audio In, or Digital Optical Audio In inputs.When a Dolby Digital or DTS signal is detected, the Dolby Digital or DTS logo will light up for 5 seconds before fading away. 15