Vizio VP50 HDTV20A User Manual - Page 27
Connecting an external Receiver/Amp
View all Vizio VP50 HDTV20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
VIZIO VP50 HDTV20A User Manual 2.6 Connecting an external Receiver/Amp 1. Turn off the power to the LCD HDTV and Receiver/Amp. 2. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the LCD HDTV. 3. Turn on the power to the LCD HDTV and Receiver/Amp. 4. Then press the MENU button on the remote control to open the On- Screen Display (OSD) menu. 5. Press the button on the remote control to select the Audio Adjust menu. 6. Press the button on the remote control to select SPEAKERS. 7. Press the button on the remote control to select OFF so that the sound from the LCD HDTV will now be routed through your Receiver/Amp system. Press either the MENU key to return to the previous menu display or the EXIT key to return to your program if task has been completed. Note: a) Refer to your Receiver/ Amp user manual to select the corresponding audio input. b) The audio output is not amplified and can not be connected directly to external speakers. Optical Output of Audio received with HD Programs If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with the programs from the DTV/TV CABLE/ANTENNA input. Version 2/25/2008 27 www.VIZIO.com