Vizio VP50 HDTV20A User Manual - Page 9
Basic Controls and Connections - part
View all Vizio VP50 HDTV20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
VIZIO VP50 HDTV20A User Manual Chapter 1 Basic Controls and Connections 1.1 Front Panel Power LED - Lights green when powered on, yellow when powered off. Remote Control Sensor - This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Side Panel Controls Power ( ) - Switch the VP50 HDTV20A on by pressing the button once. Press the button again to the VP50 HDTV20A off. Menu - This button activates the On Screen Display (OSD). If a submenu is active, pressing this button will return to the previous menu level. Channel ▲/▼ - Use these buttons to step up or down the TV channels. While the OSD is active, these buttons function as up and down controls in the OSD menus. Volume ◄/► - Use these buttons to increase or decrease to the speaker volume. While the OSD is active, these buttons function as left and right controls in the OSD menus. Input (Enter) - Repeated pressing of this buttons steps through the input sources in the following sequence: TV, AV1, AV2, AV3 (S-Video), Component1, Component2, RGB, HDMI1, HDMI2 and HDMI3. Once you have stepped through the entire sequence, you will return to the beginning. Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the OSD is not active, pressing this button will display the current input mode. Version 2/25/2008 9 www.VIZIO.com