Vizio VW42LHDTV10A User Manual - Page 23

Connecting an external Receiver/Amp

Page 23 highlights

VIZIO VW42L HDTV10A User Manual 2.7 Connecting an external Receiver/Amp 1. Turn off the power to the LCD HDTV and Receiver/Amp. 2. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the LCD HDTV. 3. Turn on the power to the LCD HDTV and Receiver/Amp. 4. Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu. 5. Press the on the remote control to select the Audio menu. 6. Press the on the remote control to select SPEAKERS 7. Press the on the remote control to select OFF so that the sound from the LCD HDTV will now be routed through your Receiver/Amp system. Note: a) b) Refer to your Receiver/Amp user manual to select the corresponding audio input. The audio output is not amplified and cannot be connected directly to external speakers. Optical Output of Audio received with HD Programs If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with the programs from the DTV/TV CABLE/ANTENNA input. Version 6/19/2007 23 www.VIZIO.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

VIZIO VW42L HDTV10A User Manual
Version 6/19/2007
23
www.VIZIO.com
2.7
Connecting an external Receiver/Amp
1.
Turn off the power to the LCD HDTV
and Receiver/Amp.
2.
Using an audio cable (white and red
connectors), connect the cable to the
audio
input
connectors
on
the
Receiver/Amp and connect the other
end to the ANALOG OUT (white area)
audio connectors at the rear of the
LCD HDTV.
3.
Turn on the power to the LCD HDTV
and Receiver/Amp.
4.
Then press the MENU button on the
remote control to open the On-Screen Display (OSD) menu.
5.
Press the
on the remote control to select the Audio menu.
6.
Press the
on the remote control to select SPEAKERS
7.
Press the
on the remote control to select OFF so that the sound from the LCD HDTV will
now be routed through your Receiver/Amp system.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the Plasma HDTV.
This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA input.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.