Vizio VW42LHDTV10A User Manual - Page 8
Basic, Controls, Connections - vw42l hdtv10a
View all Vizio VW42LHDTV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
VIZIO VW42L HDTV10A User Manual Chapter 1 Basic Connections Controls 1.1 Front Panel Power 'VIZIO' light - The VIZIO name lights white when powered on and orange when powered off. Remote Control Sensor - This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.2 Right Side Panel Controls Power ( ) - Switch the VW42L on by pressing the button once. Press the button again to the VW42L off. Menu - This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this button will return to the previous menu level. Channel ▲/▼ - Use these buttons to step up or down the TV channels. While the OSD is active, these buttons function as up and down controls in the OSD menus. Volume ◄/► - Use these buttons to increase or decrease to the speaker volume. While the OSD is active, these buttons function as left and right controls in the OSD menus. Input (Enter) - Repeated pressing of this buttons steps through the input sources in the following sequence: TV, AV1 (S-Video or Video), AV2, Component 1, Component 2, HDMI 1, HDMI 2, and RGB. Once you have stepped through the entire sequence, you will return to the beginning. Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the OSD is not active, pressing this button will display the current input mode. 1.3 Left Side Connections 1. AV1 In - Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. The S-Video, if connected, will take priority over AV1 RCA connector. and Version 6/19/2007 8 www.VIZIO.com