Vtech 6800G User Manual - Page 7
Step 1: Make sure that you have Internet access, Step 2: Connect router to your cable/DSL modem - at t wireless router
UPC - 650530002229
View all Vtech 6800G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Step 1: Make sure that you have Internet access Before you begin, launch your web browser to make sure you can connect to the Internet. If you can connect to web sites as usual, proceed to Step 2, below. If you cannot connect to the Internet, check your modem connections, or consult the User Manual provided by your broadband/Internet service supplier. You must have Internet access before installing the router. Step 2: Connect router to your cable/DSL modem and to your computer 1 Connect power adapter Connect the power adapter to the router, then plug it into an electrical outlet not controlled by a wall switch. Rotate antenna to fully upright position 2 Connect router to computer Unplug the Ethernet cable from your modem, then plug it into the LAN 1 port of the router. (You can use the other ports to connect devices not equipped for wireless networking). 3 Connect router to modem Use the supplied Ethernet cable to connect the modem to the WAN port of the router. WAN stands for Wide Area Network (Internet). 4 Check lights & connections Before proceeding, make sure all connections match the diagram at right. Check the front of the router to make sure the Power, WAN and LAN1 lights are on (see page 6). Ethernet Cables Computer Modem Power Adapter AT&T Plug&Share™ 54 Mbps Wireless Router 6800G 7