Vtech CS6328-3 User Manual - Page 1

Vtech CS6328-3 Manual

Page 1 highlights

Quick start guide CS6328-2/CS6328-3/CS6328-4/ CS6328-5/CS6329/CS6329-2/ CS6329-3/CS6329-4/CS6329-5 Introduction This quick start guide provides you with the basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the user's manual for complete installation and operation instructions. Telephone base and charger installation Install the telephone base and charger(s) as shown below. Charger adapter Telephone base power adapter Telephone wall jack Electrical outlet not controlled by a wall switch If you have DSL high speed Internet service, a DSL filter (not included) is required. Telephone line cord Charger Telephone base Use only the power adapter(s) and battery(ies) supplied with this product. Battery installation and charging Install the battery as shown below. Once you have installed the battery, you may be able to make and receive short calls. For best performance, charge the handset battery continuously for at least 16 hours. 1 Plug the battery connector securely into the socket. 2 Place the battery with the wires inside the battery compartment. 3 Slide the battery compartment towards the center of the handset until it clicks into place. 4 Charge the handset in the telephone base. Charge light remains on when charging. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

±
Quick start guide
CS6328-2/CS6328-3/CS6328-4/
CS6328-5/CS6329/CS6329-2/
CS6329-3/CS6329-4/CS6329-5
Introduction
This quick start guide provides you with the basic installation
and use instructions. A limited set of features are described in
abbreviated form.
Please refer to the user’s manual for complete installation and
operation instructions.
Telephone base and charger installation
Install the telephone base and charger(s) as shown below.
Use only the power adapter(s) and battery(ies) supplied with
this product.
Telephone base
Telephone line cord
Telephone base
power adapter
Telephone
wall jack
If you have DSL
high speed Internet
service, a DSL filter
(not included) is
required.
Electrical outlet
not controlled by
a wall switch
Charger adapter
Charger
Battery installation and charging
Install the battery as shown below. Once you have installed the
battery, you may be able to make and receive short calls. For
best performance, charge the handset battery continuously for at
least ±6 hours.
CHARGE
light
remains on
when charging.
±
Plug the battery connector
securely into the socket.
2 Place the battery with the
wires inside the battery
compartment.
3
Slide the battery
compartment towards the
center of the handset until it
clicks into place.
4
Charge the handset in the
telephone base.