Vtech IA6765 User Guide - Page 7

Getting started Installation Check battery indicator If you receive a check battery warning, it indicates one of the following: 1. There is no battery in your handset. You need to install the supplied battery into your handset (see Install handset battery on page 5.) 2. The battery needs to be replaced. 3. The battery has been installed incorrectly. Please reinstall (see Install handset battery) and/or see the diagram in the battery compartment of the handset. Check for dial tone After the battery is charged, press If not, see Troubleshooting. or SPEAKER on the handset. You should hear a dial tone. • Plug the AC adaptor into an electrical outlet. If the battery has not been charged, place the handset in the base or charger, and allow it to charge for at least 16 hours. • Caution: Use only the VTech power supply provided with your phone. • If the phone will not be used for a long period of time, remove the battery to prevent possible leakage. • If you have any trouble installing your phone, please refer to the Troubleshooting section near the end of this manual. • When in low battery mode, the keypad sounds, backlighting and speakerphone features will not work. When the battery has been charged, these features will return to their normal function. www.vtechphones.com