Vtech KidiZoom Smartwatch DX3 User Manual - Page 10

AUTOMATIC SCREEN OFF To preserve battery life, the screen will automatically shut off after a short period of time when in Clock mode. Note: The auto screen off time can be adjusted in the Auto Screen Off in Advanced Settings. Please refer to the Settings section in this guide. From other activities, the watch screen will return to Clock mode automatically if there is no input for one minute. In games, auto exit time occurs after two minutes of inactivity. In Camera mode, auto exit occurs after three minutes of inactivity. CONNECTING TO A COMPUTER You can connect the KidiZoom® Smartwatch DX3 to a PC or Mac using the included Micro-USB Cable. To transfer files between your watch and computer, follow these steps: • Pull up the rubber cover of the Micro-USB Port on the side of your watch. • Insert the Micro-USB Cable (small end) into the Micro-USB Port on the watch. • Insert the larger end of the cable into a USB port on your computer. • You will see a removable drive called VTech 5490. Please use this to transfer files to and from the watch. There is another removable drive called VT SYSTEM, which is for storage of system data and should not be accessed by users. Note: Once the watch is connected to your computer, do not disconnect the watch while files are transferring. Only eject the watch from your computer once it completes transferring files. Once ejected, you can then physically disconnect the watch from your computer. Ensure the rubber cover over the micro-USB port is closed tightly. To Back Up Photos or Videos: • From your computer, open the DCIM folder on the removable drive VTech 5490. • Copy and paste the photo and/or video files to a location on your computer. To Back Up Recorded Sounds: • From your computer, open the VOICE folder on the removable drive VTech 5490. 10