Vtech LS6125-2 User Manual - Page 37

• If you have caller ID service, the clock will be set automatically with incoming calls, but you will need to make sure the year is correct. See Set the clock for instructions on how to set the year, time and day manually. • Press and hold /SKIP or /REPEAT while setting the minutes or year to advance or decrease by increments of ten. 34 Answering system Activate the answering system The answering system must be turned on to answer and record messages. Press ANS ON/OFF to turn the answering system on or off. If the answering system is turned on, it will announce "Calls will be answered," and the ANS ON/OFF light will be on. If the answering system is turned off, it will announce "Calls will not be answered," and the ANS ON/OFF light will be off. Set the clock Prior to playing a message, the answering system announces when it was received. Before using the answering system, set the year, time and day, so that messages are dated correctly. If the clock is not set before new messages are recorded, the system will announce "Time and day not set," before each message is played to remind you to set the clock. 1. Press CLOCK. The system announces the clock setting (e.g. year, time and day), then announces: "To set the clock, press CLOCK." 2. Press CLOCK. The system announces the current year. 3. Press /SKIP or /REPEAT until the system announces the correct year, then press CLOCK. The system announces the current hour. 4. Press /SKIP or /REPEAT until the system announces the correct hour, then press CLOCK. The system announces the current minute. www.vtechphones.com