Vtech My First Kidi Smartwatch User Manual - Page 5

will not charge. Only move the switch to the Off position when the watch will not be used for an extended period of time. Note: It is not necessary to turn the watch off in daily use. Once the Master Power Switch is Off, the watch will stop functioning. After it is turned On again, the time and date will have to be reset. BATTERY RECHARGING Note: Adult operation required. The watch should be fully charged before first use. To charge the My First Kidi™ Smartwatch, connect the watch to a computer using the included Micro-USB Cable. To do so correctly, please follow these steps: • Make sure that the Master Power Switch is set to the On position before charging. • Pull up the rubber cover of the Micro-USB Port on the side of the watch. • Insert the Micro-USB Cable (small end) into the Micro-USB Port on the watch. • Insert the large end of the Micro-USB Cable into a USB port on your computer. • Once the connection is successful, you will see a battery charging symbol appear on the watch screen. • Check the charging progress regularly throughout recharging. • When the battery is fully charged, the fully charged battery icon will appear. Then the screen will automatically turn off. You may then disconnect your fully charged watch from the computer. Note: It will take approximately 3.5 hours to fully charge the battery. The actual charging time depends on the charging current, the remaining charge in the battery prior to recharging, and the ambient temperature. The optimum ambient temperature is 32°F - 104°F (0°C to 40°C) 5