Vtech Switch & Go Dinos Turbo - Bronco the RC Tricera User Manual - Page 9

Page 9 highlights

Product Features PRODUCT FEATURES 1. TURN THE UNIT ON Slide the Remote Control Off/Channel Switch to the I or II position to turn the Remote Control ON. Slide the Off/Channel Switch on Bronco the RC Triceratops™ to the same I or II position as the Remote Control. The Remote Control and Bronco the RC Triceratops™ must be on the same I or II channel to send and receive signals. Note: I and II settings are two different channels the Remote Control and Bronco the RC Triceratops™ can operate on. If two units are operating in the same vicinity, put one unit on channel I and the other on channel II. 2. REMOTE CONTROL POWER INDICATOR After the Remote Control is turned ON, the Remote Control Power Indicator will flash to show the remote is ON. The indicator light will illuminate anytime a button is pressed, lever is pulled or the Steering Wheel is turned. The light indicates a signal is being sent to Bronco the RC Triceratops™. 3. TRANSFORMATION BUTTON Press the Transformation Button to remotely transform Bronco the RC Triceratops™ from dino to vehicle or from vehicle to dino. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
8
PRODUCT FEATURES
1. TURN THE UNIT ON
Slide the
Remote Control
Off/Channel Switch
to the
I
or
II
position to turn the
Remote Control ON
.
Slide the
Off/Channel Switch
on
Bronco the RC
Triceratops
™ to the same
I
or
II
position as the
Remote Control
. The
Remote Control
and
Bronco
the RC Triceratops
™ must be on the same
I
or
II
channel to send and receive signals.
Note:
I
and
II
settings are two different channels the
Remote Control
and
Bronco the RC Triceratops
™ can operate on. If two units
are operating in the same vicinity, put one unit on channel
I
and the other on channel
II
.
2. REMOTE CONTROL POWER INDICATOR
After the
Remote Control
is turned
ON
, the
Remote Control Power Indicator
will flash to
show the remote is
ON
. The indicator light will
illuminate anytime a button is pressed, lever is
pulled or the
Steering Wheel
is turned. The light
indicates a signal is being sent to
Bronco the
RC Triceratops
™.
3. TRANSFORMATION BUTTON
Press the
Transformation Button
to remotely
transform
Bronco the RC Triceratops
™ from
dino to vehicle or from vehicle to dino.
Product Features