Vtech Three Handset Expandable Cordless Phone System with Digital Answering Syst - Page 18

Telephone settings CID time synchronization This feature allows the time and date to be set by incoming >Set date/time caller ID information. The default setting is On. Home area code 1. Press MENU/SELECT when the handset is not in use. 2. Press / VOL or VOL/CID to highlight >Settings, then press MENU/SELECT. 3. Press / VOL or VOL/CID to highlight >Set date/time, then press MENU/SELECT. 4. Press / VOL or VOL/CID to highlight >CID time sync, then press MENU/SELECT. 5. Press / VOL or VOL/CID to choose >On or >Off, then press MENU/SELECT to confirm your selection. You hear a confirmation tone. Date & time >CID time sync CID TIME SYNC >On Home area code If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log. 1. Press MENU/SELECT when the handset is not in use. 2. Press / VOL or VOL/CID to highlight >Settings, then press MENU/SELECT. >Home area code Dial mode 3. Press / VOL or VOL/CID to highlight >Home area code, then press MENU/SELECT. 4. Use the dialing keys to enter the desired home area code. HOME AREA CODE ___ • Press MUTE/REMOVE to delete a digit. • Press and hold MUTE/REMOVE to delete the entire entry. 5. Press MENU/SELECT to confirm your selection. You hear a confirmation tone. If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed, following the steps above. After you have deleted the home area code, _ _ _ will appear in the display. 14