Vtech Touch Tablet Advanced User Manual - Page 3

Important: When replacing the 4 "AA" size batteries, make sure the backup batteries are in the unit. Otherwise you will lose any information stored on the unit. BACKUP BATTERY INSTALLATION Your Touch Tablet™ comes with a backup battery already installed. To avoid damage to the unit from leaky batteries, replace the backup battery at least once a year. TO REPLACE THE BACKUP BATTERY 1. Make sure the unit is OFF. 2. Using a small cross-head screwdriver, loosen the battery cover. 3. Insert 1 CR2032 size battery as illustrated. 4. Close the battery cover and tighten the screws to secure it. Important: While replacing the backup battery, the 4 "AA" size batteries must be kept in the unit. Otherwise, you will lose any saved information. STANDARD FOR BATTERY TOYS • Do not try to recharge non-rechargeable batteries; • Rechargeable batteries are to be removed from the toy before being charged; • Rechargeable batteries are only to be charged under adult supervision; • Do not mix different types of batteries; Do not mix new and used batteries; • Only use batteries of the recommended or equivalent type; • Always insert batteries properly matching the plus (+) and minus (-) signs; • Batteries that have run out of energy must be removed from the toy; • Do not short-circuit the supply terminals; • Do not use more batteries than recommended; • Remove batteries from the toy if it will not be used for an extended period of time. INSTRUCTIONS & ACTIVITIES AC-DC ADAPTOR Use a VTech® adaptor or any other standard adaptor that complies with EN61558 DC 9V 300mA center-positive adaptor. CONNECTING THE ADAPTOR 1. Make sure the unit is OFF. 2. Locate the adaptor jack on the side of the unit. 3. Insert the adaptor plug into the unit's adaptor jack. 4. Plug the adaptor into a wall outlet. 5. Turn the unit ON. NOTE: When the toy is not going to be in use for an extended period of time, unplug the adaptor. 3