Vtech V.Smile Baby Infant Development System User Manual - Page 8

INTRODUCTION CONNECTING TO A TV NOTE: Before you connect the V.Smile Baby™ Infant Development System to a TV, check to make sure that the unit is working. Once you have turned the unit ON, the power indicator light should glow. If the ON/OFF Button does not glow, check to see that the adaptor is connected correctly or that the batteries are installed correctly. If the batteries are not installed correctly, the V.Smile Baby™ Infant Development System will not function and damage to the unit could result. Make sure that your TV and the unit are turned OFF before you begin making connections. Connect the V.Smile Baby™ Infant Development System to your TV or monitor by plugging the colored cables on the unit into the matching color video and audio input jacks on your TV set. For TVs with stereo audio inputs: - Connect the yellow plug on the V.Smile Baby™ cable to the yellow video input terminal on your TV. - Connect the white plug on the V.Smile Baby™ cable to the white audio input terminal on your TV. For TVs with a mono audio inputs: - Connect the yellow plug on the V.Smile Baby™ cable to the yellow video input terminal on your TV. - Connect the white plug on the V.Smile Baby™ cable to the white audio input terminal on your TV. CONNECTING TO A VCR If there is no video IN and audio IN terminal on your TV set, you can connect V.Smile Baby™ to a VCR. - Connect the yellow plug on the V.Smile Baby™ cable to the yellow video input terminal on your VCR. - Connect the white plug on the V.Smile Baby™ cable to the white audio input terminal on your VCR. 7