Vtech ev2626 User Manual - Page 12

Basic Operation Handset Operation Call Forward • A Handset (HS1), on an external call can forward it to the other Handset (HS2), by pressing and holding the INTERCOM key. The display of HS1 will initially show: • HS2 can Press ON, SPEAKERPHONE or any dialing keys to answer the call. NOTE: If HS2 does not respond in about 30 seconds, the external call will be returned to HS1 and the display will show CALL BACK: If the returned call is not answered within 30 seconds, the external call will end automatically. CALL FORWARDED CALL BACK Call Transfer • A Handset (HS1), on an external call can transfer it to the other Handset (HS2), by pressing the INTERCOM key. NOTE: The external call is put on hold automatically. • HS2 will ring, showing an intercom call. • HS2 can answer the intercom call by pressing ON. These two handsets (HS1 and HS2) can discuss the external call. • When HS1 presses OFF, the external call is then transferred to HS2. CALL TRANSFERRED will briefly display on HS1. NOTE: If there is no answer on HS2, then HS1 can be reconnected to the held call by pressing ON to reconnect to the external call. Conference Call It is possible to establish a conference between two Handsets and the external line. If a Handset already has a connection to the external line, and the other Handset presses ON or SPEAKERPHONE, a conference is immediately established. Both Handsets will show: CONF. 00:00:25 12