Waring CB15P Instruction Manual - Page 9
Hot Blending Instructions: Important, Maintenance
View all Waring CB15P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. Reduce amounts of material processed to less than the full 4-liter capacity when working with viscous or fibrous materials. 3. When cleaning exterior of container, keep it in normal, upright operating position to prevent liquids from running into the bearing through the bottom end. HOT BLENDING INSTRUCTIONS: IMPORTANT! To minimize the possibility of scalding when blending hot materials, the following precautions and procedures must be observed: • Hot materials are those which are 100˚F (38˚C) or hotter. • Always start blending on lowest speed setting, then progress to desired speed. • Never stand directly over blender when it is being started or while it is running. • Constant monitoring of the condition of the container lid gasket and the container lid clamps is mandatory. Replace these parts if they become worn or loose, or are damaged in any way. MAINTENANCE Motor - Not for water-jet cleaning. The Waring Commercial Blender ball-bearing motor requires no greasing or oiling. Sealed-in lubrication provides smooth unit operation. Container - The stainless steel container can be sterilized without injury to the bearing. Container pad is to be washed and rinsed in solutions as noted in the separate Cleaning and Sanitizing Instructions. Depending on the operating conditions, service life of the main components of the container blade assembly, socket head shaft and shaft seals is 500 hours of actual running time. 9