Waring FP25 Instruction Manual - Page 4

THE PARTS The Waring® FP25 and FP25C food processors are compact, easy-to-use appliances. Completely assembled, the FP25 is only 19" high (48.9cm) and stores conveniently when not in use. For more compact storage, the cover can be stored upside down with the feed tube in the bowl. When stored this way, the unit is only 143⁄4" high (37.5 cm). The Waring FP25 and FP25C food processors both consist of the following standard parts and accessories: 1. Solid Polycarbonate Motor Base with vertical stainless steel shaft 2. Two Control Levers a. ON b. PULSE / OFF 3. Safety Interlock Tower Prevents machine from operating until cover is in place 4. Clear Work Bowl with 63⁄4-inch diameter (17.1 cm) Dry capacity of 2.5 quarts Wet capacity of 1.5 quarts 5. Clear Work Bowl Cover a. Large oval-shaped Feed Tube for maximum use of cutting surface 3⁄8 inches (.953cm) x 23⁄4 inches (7.0 cm) wide b. Large Pusher with full-size and reduced-size feed options c. Small Pusher used within the large pusher for smaller vegetables, pepperoni, etc. Note: This combination pusher allows use of the entire feed tube for large foods and provides controlled processing for small-diameter foods such as carrots, celery and pepperoni. 6. Sharp and durable S-Blade (Cutter Blade) to chop, grind, purée, mix and knead 7. 4 mm, 5⁄32" Slicing Disc 8. 5 mm, 3⁄16" Shredding Disc 9. 6.5 mm x 6.5 mm, 1⁄4" x 1⁄4" Julienne Disc 10. Safety Reset Switch Note that all of the FP25 and FP25C accessory discs have a unique offset stem. The design of this stem increases the cutting / processing efficiency of these accessories. The stems can be easily removed for cleaning in accordance with NSF guidelines. The FP25C comes with these additional components: 11. Continuous Feed Chute 12. Clear Cover for Feed Chute 13. Slinger 6 BATCH BOWL 5c CONTINUOUS FEED 5c 5b 5a 5 6 4 3 1 2a 2b FP25 is batch bowl model 5b 7 8 9 3 5a 12 13 11 10 1 2a 2b FP25C is combination model with batch bowl and continuous-feed parts 7