Waring PDM104 Instruction Booklet - Page 6

4. Unplug the drink mixer before cleaning the outside of the unit. 5. Clean the outside of the unit by using a cloth moistened with a mild soap and water solution. Rinse the cloth and wipe the unit again. Prevent liquid from running into the housing by wringing all excess moisture from the cloth before using it. Wipe the housing dry after rinsing. Do not immerse the unit in water or any other liquid. Maintenance MOTOR: The motor requires no greasing or oiling. Sealedin lubrication gives the unit lifetime-smooth operation. Helpful Hints 1. Always be sure the control switch is in the "OFF" (O) position before plugging in the drink mixer and before removing the mixing cup when mixing has been completed. 2. For best mixing results, add wet recipe ingredients to the mixing cup before dry recipe ingredients. 3. The mixing times of beverages containing ice creamtype ingredients will vary according to the hardness of the ingredients. Softer ingredients work better. 4. If your recipe calls for ice, use only crushed ice in the drink mixer. 5. Do not mix hot ingredients with your drink mixer. 6. Only operate the drink mixer when the cup is attached. 7. In general, start mixing on low speed for about 3 seconds. Finish mixing on low speed if all your ingredients are liquid, to avoid splashing. If your recipe includes solid ingredients (ice cream, powdered milk, etc.) or if you need to whip cream or aerate eggs, switch to high speed after the first 3 seconds of mixing 5