Waring TBB160 Instruction Manual - Page 11
To Sanitize And Dry Container, To Clean And Sanitize Motor Base, Service
View all Waring TBB160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
MUST NOT EXCEED 115˚F (46˚C), AND QUANTITY USED MUST NOT EXCEED ONE-QUARTER CONTAINER FULL. TO SANITIZE AND DRY CONTAINER 1. Wipe down exterior of container with a soft cloth or sponge dampened with sanitizing solution. 2. Fill container with sanitizing solution, cover, place on motor base, and run on HI speed for one (1) minute. Empty container. Dislodge any residual moisture from blade assembly by placing empty container on motor base and running on HI speed for two (2) seconds. 3. Sanitize lid and lid insert by immersing in sanitizing solution for two (2) minutes. 4. Do not rinse container, lid, or lid insert after sanitizing is completed. Allow parts to air-dry. TO CLEAN AND SANITIZE MOTOR BASE 1. UNPLUG POWER CORD. Wipe down exterior surfaces of motor base with soft cloths or sponges dampened with washing solution, rinse water, and sanitizing solution. Prevent liquid from running into motor base by wringing all excess moisture from cloths or sponges before using them. DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION, RINSE WATER OR SANITIZING SOLUTION. 2. Allow motor base to air-dry before using. SERVICE Refer to the list of Authorized Service Centers enclosed with your Waring® Commercial Blender for the name of the nearest Service Center, or write to: Waring Factory Service Center P.O. Box 3201 314 Ella T. Grasso Avenue Torrington, CT 06790 (800) 492-7464 NOTE: If your application involves the processing of biologically active material, we request that any items returned for service be sterilized before being shipped. 11