Waring TBB160 Instruction Manual - Page 4
Blender Specifications
View all Waring TBB160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded. NOTE: Use of an adapter is not permitted in Canada. BLENDER SPECIFICATIONS • Capacity: 48 oz. Working Capacity • Rating: 120 Volts, 60 Hz, 13.0 Amps • Base Material: Polycarbonate • Bearing: High-Precision Ball Bearing • Cord: 6-Foot, Three-Conductor Ground Cord with Strain Relief in Base • Overall Height: 17 Inches • cETLus, NSF Listed • Operating Cycle: 1 min. ON/3 min. OFF Controls: TBB145 / TBB160 - LO 20,500, HI 24,000, PULSE 24,000 TBB175 - V ariable speed dial from 1,000 to 17,000 RPM with Pulse, 24,000 RPM 4
4
CAUTION:
Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
NOTE:
Use of an adapter is not permitted in Canada.
BLENDER SPECIFICATIONS
• Capacity: 48 oz. Working Capacity
• Rating: 120 Volts, 60 Hz, 13.0 Amps
• Base Material: Polycarbonate
• Bearing: High-Precision Ball Bearing
• Cord: 6-Foot, Three-Conductor Ground Cord with Strain Relief
in Base
• Overall Height: 17 Inches
• cETLus, NSF Listed
• Operating Cycle: 1 min. ON/3 min. OFF
Controls:
TBB145 / TBB160 – LO 20,500, HI 24,000, PULSE 24,000
TBB175 – Variable speed dial from 1,000 to 17,000 RPM with
Pulse, 24,000 RPM