Waring WWB5G Instruction Manual - Page 10

WATER SOURCE Autofill 1. When in autofill, the autofill icon flashes while unit is filling with water. 2. The heater will start when water level reaches low-level sensor. NOTE: If water does not reach the low-level sensor within 5 minutes, error code 6 flashes on screen. See Troubleshooting section for details. 3. When water reaches temperature, unit will display READY along with the set temperature. NIGHT MODE In Night Mode, unit will maintain water temperature at 158°F/70°C during non-business hours to save energy and enable a quicker heatup time, so that hot water is ready when you need it. When setting the time for Night Mode, you will be setting the time the unit will be reenergized and will start heating the water to your pre-set temperature (e.g., 5:00 am - unit will turn back on and start heating to 205°F). 1. SETTING TIME for NIGHT MODE a. PRESS and hold button for 2 seconds: b. Use the arrows to scroll to the desired time. c. Once desired time is displayed, wait 10 seconds, and the time will be set. Display will show set time and for 3 seconds. 2. ENTERING/EXITING NIGHT MODE a. Pressing button once will enter into Night Mode/Energy Saving Mode. Display will show the time of day and the . b. Unit will exit Night Mode and re-energize automatically at the set time. c. T o exit out of manually, press the button for 2 seconds. button or hold a. If button is pressed to exit Night Mode, you must press to re-energize the unit. b. If button is pressed to exit Night Mode, unit will automatically re-energize and start heating to set temperature. 10