Waring WWB5G Instruction Manual - Page 9

Default Settings, Operating Instructions, Setting The Temperature, Setting °f/°c, Setting The Clock

Get Waring WWB5G PDF manuals and user guides View all Waring WWB5G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

3. Turn on or plug in the power supply to the hot water dispenser. The unit fills at the approximate rate of 1 gallon (3.8 L) per minute, depending on water line pressure. 4. Heat and discard at least one tank of water. DEFAULT SETTINGS • Temperature: 150°F/65°C • Unit of measurement for temperature: Fahrenheit • Water connection: Plumbed into water supply • Night mode temperature: fixed at 158°F (70°C) OPERATING INSTRUCTIONS SETTING THE TEMPERATURE 1. Press button once. 2. Use the arrows to reach your desired temperature. 3. Once desired temperature is displayed, press the to set or wait 10 seconds to set new temperature. button 4. Display will show set temperature and PRESS START blinking. 5. Press to begin filling and heating water. CAUTION: Water is very hot. Use caution when pouring or transporting hot water. Accidental spills may result in severe burns. SETTING °F/°C 1. Press button once. 2. Once in program mode, PRESS and HOLD the for 2 seconds. button 3. Use the arrows to switch from F to C. 4. Once desired unit of measure is selected, press to set. twice 5. If neither button is pressed for 15 seconds, then the F or C displayed will be programmed. SETTING THE CLOCK 1. To set the clock, press and hold the 2 seconds. button for 2. Use the arrows to scroll. 3. Once the desired time is displayed, wait 10 seconds, and the time will be set. Display will show set time for 3 seconds. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
9
3.
Turn on or plug in the power supply to the hot water dispenser.
The unit fills at the approximate rate of 1 gallon (3.8 L) per
minute, depending on water line pressure.
4.
Heat and discard at least one tank of water.
DEFAULT SETTINGS
• Temperature: 150°F/65°C
• Unit of measurement for temperature: Fahrenheit
• Water connection: Plumbed into water supply
• Night mode temperature: fixed at 158°F (70°C)
OPERATING INSTRUCTIONS
SETTING THE TEMPERATURE
1. Press
button once.
2. Use the
arrows to reach your desired temperature.
3.
Once desired temperature is displayed, press the
button
to set or wait 10 seconds to set new temperature.
4.
Display will show set temperature and PRESS START
blinking.
5. Press
to begin filling and heating water.
CAUTION:
Water is very hot. Use caution when pouring or
transporting hot water. Accidental spills may result in severe burns.
SETTING °F/°C
1. Press
button once.
2.
Once in program mode, PRESS and HOLD the
button
for 2 seconds.
3. Use the
arrows to switch from F to C.
4.
Once desired unit of measure is selected, press
twice
to set.
5.
If neither button is pressed for 15 seconds, then the F or C
displayed will be programmed.
SETTING THE CLOCK
1.
To set the clock, press and hold the
button for
2 seconds.
2. Use the
arrows to scroll.
3.
Once the desired time is displayed, wait 10 seconds, and the
time will be set. Display will show set time for 3 seconds.