Weber Genesis 2000 LP Owner Manual - Page 7
Assembly
View all Weber Genesis 2000 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly Tools needed Screwdriver Hammer 7/16 and 3/4 inch open-end or an adjustable wrench Step 1 Check package contents Cooking box (assembly) Pliers Block of wood Lid (assembly) ® ® Supplies needed You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.") Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long. While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071 to receive immediate assistance. Have your owner's manual available for reference. Hose Bottom tray Two work tables Two accessory trays Swing table 7