Weber Summit 450 NG Owner Manual - Page 6

LIGHTING EACH HEAT ZONE OPERATES INDEPENDENTLY. Summary lighting instructions are on the control panel. High Medium Low Off DA N G E R Failure to open lid while igniting the barbecue, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death. Crossover Ignition System Note - The Crossover Ignition System ignites the Left burner of each heat zone with a spark from the igniter electrode inside the Gas Catcher Ignition Chamber. You generate the energy for the spark by pushing the Crossover Ignition Button until it clicks. WARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Contact your dealer. WARNING:The storage space under the cooking module is intended for storage of nonflammable items only. Crossover Ignition System Summit 425 or 450 Crossover Ignition System Summit 475 Crossover Ignition System Summit 625 or 650 Crossover Ignition System Summit 675 Figure 1 1) Open the lid. Figure 1. 2) Make sure all burner control knobs are OFF. (Push each burner control knob down and turn clockwise.) 6