Weber Summit 450 NG Owner Manual - Page 7
TO EXTINGUISH, Select Heat Zone.
View all Weber Summit 450 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
LIGHTING (CONTINUED) 3) Turn on gas supply. WARNING: Do not lean over open barbecue. Keep your face and body at least one foot away from the matchlight hole when lighting the barbecue. 4) Select Heat Zone. 5) Push LEFT burner control knob down and turn to START/HI. 6) Push the Crossover Ignition Button several times, so it clicks each time. 7) Check that the burner is lit by looking through the matchlight hole above the burner control knob. WARNING: If the burner does not light, turn the LEFT burner control knob to OFF and wait 5 minutes to let the gas clear before you try again or try to light with a match. 8) After the LEFT burner is lit you can turn on the RIGHT burner. Note - Always light the LEFT burner first.The RIGHT burner ignites from the LEFT burner. TO EXTINGUISH Turn gas supply OFF at the source, then push down and turn each burner control knob clockwise to OFF. 7