Weber Summit Gold A6 NG Owner Manual - Page 31
WARNING: After reinstalling the gas lines, they should
View all Weber Summit Gold A6 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
MAINTENANCE 12. Lift and twist the burner assembly slightly, to separate the Crossover® tube (a) from the burners (b). B B A 31 13. Remove the Crossover® tube. 14. Pull the selected burner(s) tube(s) from manifold frame and replace with a new burner tube. 15. To reinstall the manifold assembly, reverse steps 7 through 14. ƽCAUTION: The burner openings (1) must be positioned properly over the valve orifices (2). Check proper assembly before fastening manifold in place. ƽWARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill. (See, "Check for gas leaks.") (2) (1)
31
12.
Lift and twist the burner assembly slightly, to separate the Crossover
®
tube (a) from the burners (b).
13.
Remove the Crossover
®
tube.
14.
Pull the selected burner(s) tube(s) from manifold frame and replace
with a new burner tube.
15.
To reinstall the manifold assembly, reverse steps 7 through 14.
±
CAUTION: The burner openings (1) must be positioned
properly over the valve orifices (2).
Check proper assembly before fastening manifold in place.
±
WARNING: After reinstalling the gas lines, they should
be leak checked with a soap and water solution before
using the grill. (See, “Check for gas leaks.”)
(2)
(1)
MAINTENANCE