Weber Summit Gold B4 NG Owner Manual - Page 21
Lighting Rotisserie Burner
![]() |
View all Weber Summit Gold B4 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
OPERATING INSTRUCTIONS 21 LIGHTING THE ROTISSERIE BURNER SUMMIT® D ƽATTENTION: READ BEFORE LIGHTING ROTISSERIE BURNER After a period of non-use, before lighting the Rotisserie Burner, a few seconds must pass for the gas supply line to fill. When holding the ignition button you will see a flash of flames moving from right to left across the Rotisserie Burner surface, the Rotisserie Burner is not lit until the entire ceramic surface is aflame. At this point, start a count of 20 seconds before releasing the Rotisserie Burner control knob. The Rotisserie Burner surface will glow red once the burner is fully ignited. ƽCAUTION: The Rotisserie Burner flame may be difficult to see on a bright sunny day. ƽWARNING: Check hose before each use of grill for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the grill. Replace using only a Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our website. Log onto www.weber.com®. 1) Open the lid. 2) Remove the warming rack and the cooking grates from the cookbox. 1 8 3 4 6 3 5,7 *The grill illustrated may have slight differences than the model purchased. ƽDANGER: Failure to open the lid while igniting the grill, or not waiting 5 minutes to allow the gas to clear if the grill does not light, may result in an explosive flare-up which can cause serious bodily injury or death.
![](/manual_guide/products/weber-summit-gold-a4-ng-owner-manual-f3d8783/21.png)