Weider 1033 Ultramax Be English Manual

Weider 1033 Ultramax Be Manual

Weider 1033 Ultramax Be manual content summary:

  • Weider 1033 Ultramax Be | English Manual - Page 1
    toll free number 1-800-225-0653, Mon.-FrI., 8am-apm CST. IMPORTANT: Read all safety precautions and instructons in this manual carefully before using this equipment. Save this manual for future reference. Printed in CANADA WEIDER SPORTING GOODS, INC. 21100 Erwin Street, Woodland Hills, CA. 91367 USA
  • Weider 1033 Ultramax Be | English Manual - Page 2
    . 1. Read all instructions in this manual before using this equipment. 2. Use this equipment only as described in this Owner's Guide. 3. Inspect and the age of 35 or persons with pre-existing health problems. Read all instructions before using. Weider assumes no responsibility for personal injury
  • Weider 1033 Ultramax Be | English Manual - Page 3
    LEFT 22 PAD BAR - BUTTERFLY - 3/4" X 9" 23 WEIGHT PIN - BUTTERFLY - 1" X 101/2" 24 ADJUSTABLE UPRIGHT 25 BACKREST ADJ BAR 26 ARM CURL PAD 27 PAD SUPPORT 30 5/16" NYLON LOCK NUT 31 5/16" X 2 1/2" HEX HEAD BOLT 32 5/16" X 3 1/4" HEX HEAD BOLT 34 5/16" X 13/4" EYELET BOLT 35 5/16
  • Weider 1033 Ultramax Be | English Manual - Page 4
    METAL SPACER 1 69 1/2' O.D. X 3" LONG PLASTIC SPACER 2 70 S-HOOK 2 71 WEIGHT STOP 3 72 PLASTIC SLEEVE - 1 1/8" O.D. X 2" LONG 2 80 UPRIGHT DECAL 1 ASSEMBLY MANUAL 1 HARDWARE BAG (BOLTS & NUTS) 1 HARDWARE BAG (PLASTICS) 1 ORDERING NO HH-5088*G01 HH-5018*G01 HH-5068*G01 HH-5244
  • Weider 1033 Ultramax Be | English Manual - Page 5
    and that this product reaches the customer in the best possible condition. In the event that you find any problem in workmanship or missing parts please call our toll free product service number: 1-800-225-0653. Weider provides replacement parts at no charge to the customer for one year if it
  • Weider 1033 Ultramax Be | English Manual - Page 6
    PAGE 5 WEIDER SPORTING GOODS STEP II FRAME ASSEMBLY PART NAME 30 5/16" NYLON LOCK NUT 31 5/16' X 21/2' HEX HEAD BOLT Begin by pressing 2" SQUARE PLASTIC INSERT CAPS (55) into the 5 bottom ends of the UPRIGHT (1). 2 39 5/16" X 21/4' HEX HEAD BOLT 3 55 2" SQUARE PLASTIC INSERT CAP 56 11/2'
  • Weider 1033 Ultramax Be | English Manual - Page 7
    STEP 2 BACKREST & SEAT ASSEMBLY PAGE 6 WADER SPORTING GOODS 30 5/16' NYLON LOCK NUT 32 5/16" X 31/4" HEX HEAD BOLT 41 1/4" X 3/4' ROUND HEAD MACHINE SCREW 65 5/16" I.D. X 13 /32" LONG METAL SPACER u Turn the BACKREST (4) over to expose the threaded holes. Position the LONG ANGLE' IRONS (6)
  • Weider 1033 Ultramax Be | English Manual - Page 8
    PAGE 7 WEJDER SPORTING GOODS STEP 3 LEG EXTENSION ASSEMBLY PART vAlg " " MiggneiR QTY 30 5/16" NYLON LOCK NUT 2 34 5/16" X 1 3/4' EYELET BOLT 1 38 5/16" X 2' HEX HEAD BOLT 1 45 3/8" NYLON LOCK NUT 1 46 3/8' X 2 1/2" HEX HEAD BOLT 1 57 1" ROUND PLASTIC COVER CAP 1 58 3/4" ROUND
  • Weider 1033 Ultramax Be | English Manual - Page 9
    ROUND HEAD MACHINE SCREW 2 Assemble the ARM CURL PAD (26) to the PAD SUPPORT (27) using 1/4" X 3/4" ROUND HEAD MACHINE SCREWS (41) to bolt through the Support and into the Pad. u To use the Arm Curl Pad, insert the PAD SUPPORT (27) into the top of the MAIN FRAME (3) and adjust to the
  • Weider 1033 Ultramax Be | English Manual - Page 10
    PAGE 9 WDDER SPORTING GOODS STEP 6 MAST ASSEMBLY PART..gifitig Q 30 5/16" NYLON LOCK NUT 1 34 5/16" X 1 3/4* EYELET BOLT 1 35 5/16" X 2" CARRIAGE BOLT 4 36 5/16' ACORN NUT 5 45 3/8" NYLON LOCK NUT 2 47 3/8' X 11/2' HEX HEAD BOLT 1 48 3/8' X 2' HEX HEAD BOLT 1 56 11/2" SQUARE
  • Weider 1033 Ultramax Be | English Manual - Page 11
    PAGE 10 WEIDER SPORTING GOODS CI Insert a 1/2" O.D. X 1 3/8" LONG METAL SPACER (68) into a PULLEY (17). Insert the Pulley Into the top of the TOP MAST SECTION (14) andusinge.3113"- X 2"-HEX-HEAD-BOLT (48); boltirrpfeee-by-beiting-tivetigh the4op of the•Mast and then through the Pulley. Secure with
  • Weider 1033 Ultramax Be | English Manual - Page 12
    LONG PLASTIC SLEEVE ... . .. i:4TY. 2 2 2 2 2 2 2 2 2 2 2 2 There are two Butterfly attachments with this unit: a RIGHT BUTTERFLY (20) and a LEFT BUTTERFLY (21). Instructions are given for one and are repeated to assemble the other. Assemble the end with the hole of the 3/4" X 9" BUTTERFLY PAD BAR
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

41,
PAN
,
MODEL
NO.
1033
c...tuee
-
SERIAL
NO.
Write
serial
number
in
the
space
above
for
reference.
SERIAL
NUMBER
DECAL
0
WAIT,
READ
THIS
FIRST!
If
you
find
this
unit
to
have
missing
or
defective
parts
please
have
ready
the
following
Information
listed
below
before
calling
the
800
NUMBER.
The
ASSEMBLY
MANUAL
MODEL
NUMBER
of
this
UNIT
PART
NAME
or
DESCRIPTION
ORDERING
NUMBER
THE
QUANTTTY
of
each
part
that
you
need.
THE
MODEL
NUMBER
of
this
unit
can
be
found
In
the
UPPER
LEFT-HAND
or
RIGHT-HAND
CORNER
of
this
page.
The
MODEL
NUMBER
Is
a
series
of
FOUR
or
FIVE
NUMBERS,
ore
NUMBER
proceeded
by
TWO
LETTERS.
THE
PART
NAME
or
DESCRIPTION
and
the
ORDERING
NUMBER
can
be
found
on
the
PARTS
LIST
PAGE
O
0
O
wel
d
er
s.
'
OWNER'S
MANUAL
A
--
MADE
IN
CANADA
-74e
MODEL
1033
a
O
O
O
WEIDER
is
committed
to
provid*
you
complete
customer
satisfaction.
If
you
have
any
questions
concerning
the
assembly
of
this
product
or
fi
nd
damaged
or
missing
parts,
we
guarantee
you
direct
assistance.
AVOID
THE
HASSLE
OF
CONTACTING
THE
STORE
FOR
PARTS.
Call
our
'CUSTOMER
ASSISTANCE
LINE'
for
assistance
with
parts
and
information
by
calling
our
toll
free
number
1-800-225-0653,
Mon.-FrI.,
8am-apm
CST.
IMPORTANT:
Read
all
safety
precautions
and
instructons
in
this
manual
carefully
before
using
this
equipment.
Save
this
manual
for
future
reference.
Printed
in
CANADA
WEIDER
SPORTING
GOODS,
INC.
21100
Erwin
Street,
Woodland
Hills,
CA.
91367
USA