Weider 1200 User Manual - Page 24

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M8 Nylon Locknut (58) M10 Nylon Locknut (56) Large Washer (78) M12 Nut (82) M10 Washer (57) M10 x 46mm Bolt (81) M10 x 51mm Bolt (66) M6 x 63mm Screw (70) M8 x 63mm Carriage Bolt (64) M10 x 63mm Bolt (75) M10 x 25mm Button Bolt (77) M8 Washer (59) M8 x 22mm Shoulder Bolt (65) M6 Washer (80) M4 x 20mm Self-tapping Screw (69) M4 Washer (33) M8 x 65mm Bolt (68) M10 x 67mm Bolt (71) M10 x 70mm Bolt (72) M10 x 77mm Bolt (79) M6 x 16mm Screw (62) M10 x 85mm Bolt (67) M10 x 155mm Bolt (74)