Weider 2990 I Uk Manual - Page 11
Do not overtighten the M8 Locknut 69.
![]() |
View all Weider 2990 I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Apply grease to a 1/2" x 6 1/8" Bolt (64). Orient the Arm Frame (9) as shown. Attach the Arm Frame (9) to the Top Frame (8) with the 1/2" x 6 1/8" Bolt (64), two 1/2" Washers (72), and a 1/2" Locknut (70). Do not overtighten the 1/2" Locknut (70). The Arm Frame (9) must pivot easily. 10 64 Grease 72 9 8 72 70 11. Apply grease to an M8 x 42mm Screw (62). Hold the Lock Rod (46) inside the bracket on the Upright (5). Attach the Lock Rod (46) to the Upright (5) with the M8 x 42mm Screw (62), two M8 Washers (74), and an M8 Locknut (69). Do not overtighten the M8 Locknut (69). The Lock Rod (46) must pivot easily. Tighten the Lock Knob (45) onto the end of the Lock Rod (46). 11 69 74 45 46 5 74 62 Grease 12. Apply grease to an M8 x 63mm Bolt (61). 12 Attach a U-bracket (22) to one side of the Upright (5) with the M8 x 63mm Bolt (61), two M8 Washers (74), and an M8 Locknut (69). Do not overtighten the M8 Locknut (69). The U-bracket (22) must pivot easily. Attach the other U-bracket (22) to the Upright (5) in the same way. 11 61 22 Grease 74 22 5 74 69
![](/manual_guide/products/weider-2990-uk-manual-b182a1d/11.png)