Weider 9250 Uk Manual - Page 12
Attach the Pulley and a Long Cable Trap 50
![]() |
View all Weider 9250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
18. Wrap the High Cable (11) around a "V"-Pulley (6). 18 Attach the Pulley and a Long Cable Trap (50) to the Left Butterfly Arm (47) with an M10 x 60mm Bolt (7) and an M10 Nylon Locknut (21). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. Repeat this step with the Right Butterfly Arm (48). 7 50 6 11 47 48 21 19. Wrap the High Cable (11) around a 90mm Pulley 19 (15). Attach the Pulley to the Pulley Bracket (20) with an M10 x 47mm Bolt (103) and an M10 Nylon Locknut (21). Attach the Pulley Bracket (20) to the Top Frame (55) with an M10 Washer (9) and an M10 Nylon Locknut (21). Do not overtighten the Locknut yet. 55 20 11 103 21 9 15 21 20. Wrap the High Cable (11) under a 90mm Pulley 20 (15). Attach the Pulley and a pair of Pulley Covers (40) to the top hole in the Large "U"- Bracket (90) with an M10 x 52mm Bolt (12) and an M10 Nylon Locknut (21). Make sure the small tabs on the Pulley Covers are on top. Small Tab 21. Attach the High Cable (11) to the bracket on the 21 Front Upright (42) with an M10 x 20mm Bolt (98) and an M10 Nylon Locknut (21). 40 21 11 40 15 12 90 98 21 11 42 12
![](/manual_guide/products/weider-9250-uk-manual-56fdb36/12.png)