Weider Be Pro 265 Bench Enc Manual - Page 7
Assembly
View all Weider Be Pro 265 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • Assembly requires two persons. • Because of its weight and size, assemble the weight bench in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • To identify small parts, see page 6. • In addition to the included tool(s), assembly requires the following tools: one adjustable wrench one Phillips screwdriver Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconservice.ca/CustomerService/ registration and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Service (see the front cover of this manual) and register your product. 2. Identify the Right and Left Uprights (1, 14), and orient them as shown. 2 Attach an Upright Foot (15) to the Left Upright (14) with an M4 x 19mm Screw (19). Attach the other Upright Foot (15) to the Right Upright (1) in the same way. 1 14 15 19 15 7