Weider Crossbow By 2000x English Manual - Page 11
on the Cross Tube 11. Secure the Swivel Arm
![]() |
View all Weider Crossbow By 2000x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
20. Wrap the Long Cable (80) under a 90mm Pulley (28) as shown. Attach the Pulley and a Pulley Guard (29) to the Upright (3) with an M10 x 113mm Button Head Bolt (40) and an M10 Nylon Locknut (76). Make sure that the flat edge of the Pulley Guard is on the bottom. 20 3 40 28 76 29 80 Flat Edge 21. Attach a Pulley Housing (94) to the indicated "U"channel on the 10-pound Center Crossbow (44) with an M10 x 102mm Button Head Bolt (24), two Pivot Bushings (74), and an M10 Nylon Locknut (76). Wrap the Long Cable (80) around a 90mm Pulley (28). Attach the Pulley inside of the Pulley Housing (94) with an M10 x 42mm Button Head Bolt (71) and an M10 Nylon Locknut (76). 21 44 74 24 94 71 74 76 76 28 22. Wrap the Long Cable (80) around a 90mm Pulley 22 (28). Attach the Pulley and a Pulley Guard (29) to the indicated M10 x 140mm Carriage Bolt (73) with an M10 Nylon Locknut (76). Make sure that the flat edge of the Pulley Guard is on the side shown. 23. Make sure there are no Crossbows (not shown) under the "U"-channels on the 10-pound Center Crossbow (not shown). Have a second person pull on the Long Cable (80) to create slack in the Cable. 23 Insert the end of the Long Cable (80) through the welded tube on the indicated end of the Cross Tube (11) and then through the remaining Swivel Arm (22). Make sure the Cable is on the indicated side of the welded rod in the Swivel Arm. Insert the Swivel Arm (22) into the welded tube on the Cross Tube (11). Secure the Swivel Arm with an M4 x 5mm Screw (104). Wrap the Long Cable (80) around a 90mm Pulley (28). Attach the Pulley inside of the Swivel Arm (22) with an M10 x 42mm Button Head Bolt (71) and an M10 Nylon Locknut (76). 11 80 28 29 80 76 Flat Edge 73 Rod 71 22 104 80 28 76 11
![](/manual_guide/products/weider-crossbow-2000x-english-manual-6f34819/11.png)