Weider Crossbow By 2000x English Manual - Page 9

12. Attach a Plastic Foot (53) to the Backrest Frame (15) with an M4 x 16mm Screw (62). 12 Attach the two Guard Plates (17) to the inside of the Backrest Frame (15) with four M4 x 16mm Screws (62). 13. Orient the Backrest (14) and the Backrest Backing (8) as shown. Attach the Backrest and 13 the Backrest Backing to the Backrest Frame (15) 14 with four 1/4" x 45mm Button Screws (58). Insert the rod on the Backrest Frame (15) into the slot in the Seat Carriage (12). Hold the Backrest 8 Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing. 15 14. Attach the two 10-pound Short Crossbow Caps 14 (20) to the 10-pound Center Crossbow (44) with two M4 x 12mm Flat Head Screws (85). Using twelve M4 x 12mm Flat Head Screws (85), attach the two 10-pound Crossbow Caps (101) to the 10-pound Removable Crossbow (67), the two 20-pound Crossbow Caps (88) to the 20-pound Removable Crossbow (36), four 80-pound Crossbow Caps (100) to the two 80-pound Crossbows (95), the two 40-pound Crossbow Caps (79) to the 40-pound Crossbow (96), and the other two 80-pound Crossbow Caps (100) to the 80-pound Top Crossbow (105). 15. Orient the Crossbow Cover Plate (72), with the edges up. Attach the 80-pound Top Crossbow 15 (105) to the Crossbow Cover Plate with the two 1/4" x 25mm Screws (108). Note: The Top Crossbow must be closer to the back of the Cover Plate. 15 53 62 62 17 62 17 15 Rod Slot 58 12 105 36 67 95 96 100 85 79 44 85 85 100 85 88 20 101 85 105 Edges up 72 Back 108 9