Weider Flex Ez1 Gym English Manual - Page 6
Frame, Assembly, Mounting, Plate, Brace, Upright
View all Weider Flex Ez1 Gym manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WEISER HEALTH and FITNESS ,STEP 2 SEAT FRAME ASSEMBLY PART NAME 50 5/16" X 2 1/2" HEX HEAD BOLT 51 5/16" X 2 3/4" HEX HEAD BOLT 60 5/16" FLAT WASHER 61 5/16" NYLON LOCK NUT QTY 1 61 60 2 3 • 3 El Assemble a 5/16" FLAT WASHER (60) onto a 5/16" X 2 1/2" HEX HEAD BOLT (50) and attach the BASE PLATE (5) to the bottom of the SEAT FRAME (4) by bolting through the front of the Seat Frame and then through the Base Plate. Secure with a 5/16" NYLON LOCK NUT (61). 61 60 51 51 PAGE 6. Assemble the SEAT FRAME (4) to the UPRIGHT (2) using 5/16" X 2 3/4" HEX HEAD BOLTS (51) and bolting through the bracket of the Seat Frame and then through the Upright. Assemble 5/16" FLAT WASHERS (60) onto the bolt ends and secure with 5/16" NYLON LOCK NUTS (61). 61 60 50 STEP 3 MOUNTING PLATE a SEAT BRACE ASSEMBLY PART NAME QTY 51 5/16" X 2 3/4" HEX HEAD BOLT 1 61 5/16" NYLON LOCK NUT 1 62 1/4" X 21/2" CARRIAGE BOLT 3 69 1/4" NYLON LOCK NUT 3 6 62 69 Attach a MOUNTING PLATE (6) and the SEAT BRACE (7) to the SEAT FRAME (4) by bolting with a 1/4" X 2 1/2" CARRIAGE BOLT (62) down through the MountingPlate, then though the top of the Seat Frame, and finally through one end of the Seat Brace. Fasten with a 1/4" NYLON LOCK NUT (69). u Assemble the other end of the SEAT BRACE (7) and the unassembled end of the REAR BRACE (3) to the UPRIGHT (2) by bolting with a 5/16" X 2 3/4" HEX HEAD BOLT (51) through the Rear Brace, then through the back of the Upright, and finally through the SEAT BRACE (7). Secure with a 5/16" NYLON LOCK NUT (61). 62 • 51 Assemble a MOUNTING PLATE (6) to the front of the SEAT FRAME (4) using a 1/4" X 2 1/2" CARRIAGE BOLT (62) and bolting through the Mounting Plate and then through the top of the SEAT FRAME (4). Secure with a 1/4" NYLON LOCK NUT (69). Attach a MOUNTING PLATE (6) to the UPRIGHT (2) using a 1/4" X 2 1/2" CARRIAGE BOLT (62) to bolt through the Mounting Plate and then the Upright. Secure with a 1/4" NYLON LOCK NUT (69). 69. 7 61